【问题:4.3】(2分)在S1上将F0/1接口配置为trunk模式时,出现了以下提示: Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode. 应采取 (12) 方法解决该问题。 (12)选项: A.在该接口上使用no shutdown命令后再使用该命令 B.在该接口上启用二层功后能再使用该命令 C.重新启动交换机后再使用该命令 D.将该接口配置为access模式后再使用该命令